The Khushi Fountain XL300 is one of the most popular and successful multi-purpose LED fixtures for water features and other applications. It combines high performance with small fixture size and cutting-edge technologies, great colors and controllability, high CRI with a wide selection of optics and low cost.
Diameter:
65mm 2.5 inches
Height:
65mm 2.5 inches
Height incl. bracket:
125mm 4.9 inches
Mounting:
Heavy-futy bracket for floor mounting.
Stainless Steel AISI 316L 1.4404
Also available in Stainless Steel AISI 316Ti 1.4571 – titanium stabilised version of 316
Made entirely of pure Stainless Steel, with shiny, brushed, and bead-blasted finishing details. Forming process for heavy-duty use. Ideal for fresh, swimming pool and sea-water applications. Electrical, fixture, manufacturer, and certification details are permanently laser marked on the fixture.
3 High Power LEDs made by Cree, Inc. (USA)
4 in RGBW
version – 6 in High Power Version
11.5W
667 Lumens
7.5W
370 Lumens
12.5W
1670 Lumens
30W
5400 Lumens
Also available in 3000K, 4000K and RGBAW. High-performance and high-reliability electronics work together with high-efficiency and high-power LEDs to create a stunning light output — in white or multi-color. Tight binning and high CRI ensure consistent light output across all fixtures. Color versions offer exceptional color mixing and coverage.
Power & lumens can be modified via firmware to meet project requirements.
12-24V DC
10-30V DC Operating Range. Voltage drop does not affect light intensity.
HP version only 24V DC.
24° advanced, optically-clear Lenses
Also available: 10°, 30°, 50°, 70° and elliptical lenses.
Fontana Lighting Module Gen.3
Application-specific Fontana LED module, designed for the intended use of the fixture. With embedded microprocessor, embedded drivers, advanced electronics, software and hardware protections. Each module is addressable and can be used with led:bus, DMX/RDM or Dali. Single-color versions require only power supply.
Yes
The embedded processor on the fixture constantly monitors the operation of the fixture to ensure optimal operation.
The Active Thermal Protection system uses a smart algorithm to gradually reduce the brightness in case of overheating, ensuring the max. possible light output.
Additional hardware systems provide overvoltage, voltage surge and reverse polarity protection.
Tempered, Heat-Resistant Safety Glass
3.0 meters Chlorine-Resistant Waterproof Cable
12ft SOOW for North America, UL
Listed version
5m, 10m, 15m or custom lengths available on request
IP68
> 80.000 hours estimated
Compliant to the LM80 Lumens Maintenance Spec — in 80000 hours of operation, the initial lumens output is expected to degrade less than 20%. Due to the technology of LEDs, these values are estimates.