The ULR900 is an architecturally and show-oriented underwater ring light that offers exceptionally rich colors and very powerful light output. The heavy-duty housing is made entirely of pure 316L Stainless Steel, with premium finishing, following our precision engineering principles.
Outside Diameter:
195mm 7.7 inches
Inside Diameter:
64mm 2.5 inches
Height:
40mm 1.6 inch
Mounting:
Through-Hole
Outside Diameter:
285mm 11.2 inches
Inside Diameter:
64mm 2.5 inches
Height:
40mm 1.6 inch
Mounting:
Slab-hanger with clamps (included)
Stainless Steel AISI 316L 1.4404
Also available in Stainless Steel AISI 316Ti 1.4571 – titanium stabilised version of 316
Made entirely of pure Stainless Steel, with shiny, brushed, and bead-blasted finishing details. Forming process for heavy-duty use. Ideal for fresh, swimming pool and sea-water applications. Electrical, fixture, manufacturer, and certification details are permanently laser marked on the fixture.
24 High Power LEDs made by Cree, Inc. (USA)
27 in RGBAW
version
70W
4000 Lumens
24V DC
73W
4580 Lumens
12-24V DC
High-performance and high-reliability electronics work together with high-efficiency and high-power LEDs to create a stunning light output — in white or multi-color. Tight binning and high CRI ensure consistent light output across all fixtures. Color versions offer exceptional color mixing and coverage.
Custom colors and color temperatures (e.g. 4000K, Amber, RGBAW) are available on request. Power & lumens can be modified via firmware to meet project requirements.
24° advanced, optically-clear Lenses
Also available: 11°, 40°, 70° and elliptical lenses.
Khushi Fountain Lighting Module Gen.3
Application-specific Khushi Fountain LED module, designed for the intended use of the fixture. With embedded microprocessor, embedded drivers, advanced electronics, software and hardware protections. Each module is addressable and can be used with led:bus, DMX/RDM or Dali. Single-color versions require only power supply.
Yes
The embedded processor on the fixture constantly monitors the operation of the fixture to ensure optimal operation.
The Active Thermal Protection system uses a smart algorithm to gradually reduce the brightness in case of overheating, ensuring the max. possible light output.
Additional hardware systems provide overvoltage, voltage surge and reverse polarity protection.
Tempered, Heat-Resistant Safety Glass
3.0 meters Chlorine-Resistant Waterproof Cable
12ft SOOW for North America, UL
Listed version
5m, 10m, 15m or custom lengths available on request
IP68
> 80.000 hours estimated
Compliant to the LM80 Lumens Maintenance Spec — in 80000 hours of operation, the initial lumens output is expected to degrade less than 20%. Due to the technology of LEDs, these values are estimates.