Magical — the appropriate word to describe the jaw-dropping effect of a Khushi Jumping Jets. The latest family member, the miniature MXPmini is a full-featured, stainless steel jumping jet that uses our latest technologies and innovations. Perfect effect, heavy-duty, entirely new.
Stainless Steel 316L Inside – out
The MXP Mini is a masterpiece of innovative engineering. It is economical, yet made of heavy duty Stainless Steel and machined by smart CNCs at exceptionally sharp tolerances. No compromises are made in any component quality – it’s just smart engineering.
For the MXP mini we designed a smart, sturdy mounting bracket for easy installation and firm mounting. The laser engraved sides feature clear angle markings to aid installation, while the bottom hole layout allows for various ways to mount the jet. It’s made entirely of heavy duty stainless steel.
The new cutter of the MXP mini is enclosed in a rocksolid stainless steel housing. The unibody design of the housing allows for passive cooling even without the presence of water to ensure the durability and longevity of the cutter.
Satin, Brushed, Bead-blasted and Laser-generated finishings are used across the body of the MXP mini to create a beautiful, timeless design. The finishings are carefully created and crafted in a way that they withstand extreme environmental conditions.
The MXP mini needs only one cable for power & control of the light and the cutter. It work with direct DMX/RDM and can be configured remotely via NFC — even without power.
Khushi Jumping Jets are now controllable via direct DMX/ RDM connection. A standardized, universal method of control that gives you complete control of the jet, with a wide selection of controllers and apps available. It also provides vital diagnostics and the device status back to the main controller via RDM (Remote Device Management).
The MXP mini Jumping Jets now feature the new Khushi NFC configuration technology. A simple tap on the jet with your smartphone, and you can see the device status, configure its settings and enable or disable the standalone mode. And you can do all these without having to power up the jet.
1. One DMX connection is required for both the cutter and the light.
2. A non-DMX version of the MXPmini is also available and can be controlled via PLCs or other electrical command-based systems.
3. Khushi is a recognized and formally registered DMX/RDM manufacturer listed with the ID 0965h.
4. The Tapp app is currently only available for Android devices, due to software and hardware limitations of Apple devices.
The MXP mini requires just one cable to operate. This drastically reduces the workhours at the site and the cable costs – practically by 50%.
All the controllers and drivers are integrated to the jet, you don’t have to make complex control panels with Solid State Relays, LED controllers etc.
In this mode you only need to provide power to the jet and it creates light shows and beautiful choreographies on its won.
Diameter:
220mm 9 inches
Total Height:
260mm 10 inches
Mounting:
Heavy-futy bracket for floor mounting.
Trajectory:
30°- 70°
Water Level:
0 – 150mm (0 – 6″)
1″ Female BSP/NPT
Stainless Steel AISI 316L 1.4404
Premium Satin finished with brushed details and laser etched details.
Fresh, Pool and Sea water
Laminar Precision Nozzle ⌀10mm
Refer to the Hydraulic Performance Table to review the flow requirements of available nozzles.
Instant Cutting Mechanism
Gen. 2.0
Full-Color RGBW LED
addressable, with concentrated optics and embedded self-protections
20W Total Power | 24V DC
Also available in 12V DC.
The cutter is rated 11W during operation, the light is rated at 9W when all colors are at 100%.
Direct DMX/RDM with NFC Configuration Technology
Also available with electrical control and/or led:bus.
The Jumping Jet occupies 5 DMX addresses and appears as one RDM-enabled device on compatible DMX controllers. Remote NFC configuration allows for additional functions & features.
Standalone Mode permits the use of the jet with no controller.
Yes
The embedded processor constantly monitors the operation of the fixture to ensure optimal operation.
The Active Thermal Protection system uses a smart algorithm to gradually reduce the brightness in case of overheating, ensuring the max. possible light output.
Additional hardware systems provide overvoltage, voltage surge and reverse polarity protection.
3.0 meters Chlorine-Resistant Waterproof Cable
12ft type SOOW for North
America, UL Listed version
5m, 10m, 15m or custom lengths available on request
| angle | Throw | Apex | Flow | Head | ||||
| ° | m | ft | m | ft | lpm | gpm | m | ft |
| 30° | 1.0 | 3 | 0.25 | 1 | 15 | 3.9 | 0.7 | 2.5 |
| 30° | 2.0 | 6 | 0.40 | 1.3 | 21 | 5.5 | 1.4 | 5 |
| 30° | 3.0 | 9 | 0.55 | 1.7 | 25 | 6.6 | 2.1 | 7 |
| 55° | 1.0 | 3 | 0.50 | 1.6 | 15 | 3.9 | 0.8 | 2.5 |
| 55° | 1.5 | 5 | 0.65 | 2 | 18 | 4.7 | 1.1 | 3.5 |
| 55° | 2.0 | 6 | 0.85 | 2.5 | 21 | 5.5 | 1.4 | 4.6 |
| 55° | 2.5 | 8 | 1.00 | 3 | 23 | 6.0 | 1.7 | 5.6 |
| 70° | 0.5 | 1.6 | 0.50 | 1.6 | 13 | 3.4 | 0.6 | 2.5 |
| 70° | 1.0 | 3 | 0.85 | 3 | 18 | 4.7 | 1.1 | 3.5 |
| 70° | 1.5 | 5 | 1.15 | 4 | 22 | 5.8 | 1.5 | 5 |
| 70° | 2.0 | 6 | 1.50 | 5 | 25 | 6.6 | 2.0 | 6 |
Requirements: 50 microns filtrated water. Windless conditions. Non turbulent water supply. Use of line filter is recommended.
The business strives to make for a positive experience through its offerings like Musical Water Fountain, Fountain Nozzle, Fountain Portable, Landscape Fountain, Coupling SS for fountain, Fountain Fittings, etc.
Copyright © 2024 Khushi Fountaion All Rights Reserved.
Created By. Ad Plus Web Technology.
Note :- * We have no intension of infringing copyright in any text, photos, catlogues and price lists out of our knowledge.