Fan jet’s water effect is displayed best in lower heights and at angles between 35-90 degrees off horizontal axis. For uniform illumination choose wide angle LED luminaires and place them close to the jets pointing at the middle of the stream.
Made of Stainless Steel
Unique Water Film Look
Not Water Level Dependent
Truly Impressive Water Shape
Water supply to the jet must be linear, non-turbulent
ML 150 | |||||
Material | Stainless Steel AISI 316L | ||||
Inlet BSP/NPT | 1½” | ||||
Dimensions |
112 x 160 | ||||
45° Elbow | Optional | ||||
Suction Strainer Openings Required | 2.0 mm | ||||
Spray Length ( J ) | Height (H) | Spread (F) | Spread at Max. Height (G) | Flow | Head |
0.5 m | 0.20 m | 0.24 m | 0.17 m | 71.3 Lpm | 0.5 m |
1.0 m | 0.35 m | 0.44 m | 0.33 m | 106.5 Lpm | 0.8 m |
1.5 m | 0.45 m | 0.70 m | 0.50 m | 137.4 Lpm | 1.2 m |
2.0 m | 0.60 m | 0.95 m | 0.70 m | 162.3 Lpm | 1.6 m |
2.5 m | 0.70 m | 1.05 m | 0.80 m | 186.3 Lpm | 2.0 m |
3.0 m | 0.87 m | 1.35 m | 1.00 m | 207.1 Lpm | 2.5 m |
3.5 m | 1.00 m | 1.68 m | 1.10 m | 229.6 Lpm | 2.9 m |
4.0 m | 1.18 m | 1.78 m | 1.20 m | 368.3 Lpm | 3.3 m |